Non-Residual Roto-Brite® with Biosolv®Saves time and labor — Maintains a high level of carpet appearance with a minimum of time and labor. Cleaning can be performed at the rate of 2,000 to 4,000 sq. ft. per hour.

Fast drying — Non-Residual Roto-Brite® dries quickly with a minimum of delay in re-use of cleaned area.

No residue — Because there is no measurable residue, resoiling is retarded, keeping the carpet appearance high. No measurable residue means optimum conditions are maintained for the application of topical treatments such as anti-static sprays, antimicrobials, and stain repellants. In addition, no measurable residue means no masking of the carpet manufacturer’s treatment.

Easy to use — Dilute 12 ounces of Non-Residual Roto-Brite® to 1 gallon of water. Use a Chemstractor® with spray attachment, drive block and bonnet or other rotary machine equipped with sprayer, drive block and bonnet. Spray diluted Non-Residual Roto-Brite® lightly on bonnet or pad for lubrication. Spray solution lightly on carpet in path of rotary machine while buffing the carpet. When bonnet becomes soiled, use reverse side. Soiled pads should be rinsed in warm water. When properly applied, carpet should dry within 30 minutes or less. When dry, Non-Residual Roto-Brite® leaves no measurable residue.

Use as a spotting agent — Non-Residual Roto-Brite® can be used undiluted on oil based spots or diluted with 4-6 parts of water depending on the make up of the spot. After each use, flush with water and pat dry with an absorbent, white towel.